5600W 48V MPPT Pure Sine Wave Solar inverter

5.6kW 5600W Off-grid and UPS backup Solar Inverter DC 48V to AC 230V MPPT ATS Can run many appliances simultaneously not exceeding 5600W total power. If load exceeds 5600W then it switches automatically to electricity from ESB until load drops. Can be used to run appliances from 48V battery bank when ESB electricity is not available, and batteries can be recharged by ESB, Solar Panels or generator. AC mode Rated input voltage 220/230Vac Input voltage range (170Vac~280Vac) ±2% (90Vac-280Vac)±2% Frequency 50Hz/ 60Hz (Auto detection) Frequency Range 47±0.3Hz ~ 55±0.3Hz (50Hz)/57±0.3Hz ~ 65±0.3Hz (60Hz); Overload/short circuit protection: Circuit breaker Efficiency >95% Conversion time (bypass and inverter) 10ms (typical) AC reverse protection Available Maximum bypass overload current 40A Inverter mode Output voltage waveform Pure sine wave Rated output power (VA) 5600VA Rated output power (W) 5600W Power factor 1 Rated output voltage (Vac) 230Vac(200/208/220/240Vac settable) Output voltage error ±5% Output frequency range (Hz) 50Hz ± 0.3Hz/60Hz ± 0.3Hz Efficiency >90% Peak power 10000VA Output short circuit protection: Circuit breaker Bypass breaker specifications 40A Rated battery input voltage 48V (minimum start voltage 44V) Battery voltage range 20.0Vdc~33Vdc ± 0.6Vdc (Undervoltage alarm/shutdown voltage overvoltage alarm /overvoltage recovery... settable on LCD screen) Power saving mode Load ≤50W AC charging Battery type Lead acid or lithium battery Maximum charge current 60A Charge voltage range 40~60Vdc Short circuit protection Circuit breaker and blown fuse Circuit breaker specifications 40A Overcharge protection: Alarm and turn off charging after 1 minute PV charging Maximum PV open circuit voltage 500Vdc PV operating voltage range 120-500Vdc MPPT voltage range 120-450Vdc Battery voltage range 40-60Vdc Maximum input power 6000W PV charging current range (can be set) 0-80A Charging short circuit protection: fuse Certification: CE(IEC 62109-1)