Charnwood BS410 10'' Woodworking Bandsaw

A bench top woodworking bandsaw with a 4'' cutting capacity. Precision Ground Cast Iron Work Table Quick Action Locking Rip Fence Supplied with High Quality British Made Blade Quiet Induction Motor Crosscutting Mitre Guide Included 4'' Cutting Depth Capacity 10'' Cutting Width (Throat) Quick Action Blade Tension Setting Primarily used for Woodworking A small sized woodworking bandsaw with a durable precision ground cast iron tilting table with a stop for returning to 90 degrees, after a bevel cut, and T shaped mitre fence slot. When working with larger pieces there is a sliding table extension support adding 100mm to the table width. The quick release fence locks securely onto the front rail of the table to provide a rigid straight guide for ripping. A magnifier is included to aid accurate setting of the fence along the scale, marked out in mm. The fence can be fitted on either side of the blade. The sliding mitre fence is adjustable 60 degrees in each direction, for crosscutting wood at any angle. The rack & pinion blade guard design is adjusted by using a dial on the side of the machine. The blade is then guided by two side facing bearings and a rear thrust bearing attached to the end of the guard. The side bearings are mounted on an eccentric cam, for faster setting, and can be adjusted without using any tools. The same guide set up is repeated below the table giving maximum blade control and keeping the blade true when a straight cut is required. A safety feature, only usually found on larger bandsaws, is the addition of micro switches on the doors to prevent accidental startup when changing a blade. Visit our Store: Mallow Tools Ballinamona Shanballymore Mallow Co. Cork Tel: 022-40656 Website: www.mallowtools.ie