Thickness sander

Charnwood Thickness sander bought less than six months ago. Retails for 999 Euro. Used for a single home project - has been adjusted to sand down to veneer thickness (fractions of a mm) and does so with ease. 10″ Sanding Width in a Single Pass 20″ Sanding Width using 2 Passes Variable Speed Feed Conveyor Floor Stand Included Wheel Kit Include The single pass capacity of the machine is 250mm (10″). However, by removing the side plate (which is fitted with a quick removal mechanism) the work piece can be fed through the now open end of the sander giving a capacity of up to 500mm (20″) by making 2 passes. The height of the sanding drum is adjusted using a large hand wheel and the position read off the scale, which is graduated in both millimetres and inches. Changing the sandpaper wrap is a simple task which requires no tools. Our sanding wraps are pre-cut with a taper at each which is clamped into each end of the drum. If you are using a sandpaper roll, you will need to make a template and cut the tapers before fitting. Mobility is no problem thanks to the wheels and lifting handles provided. Supplied with a fitted 80 grit sanding wrap, floor stand, wheels & lifting handles, dust port elbow, 2.0m cable and UK 3 pin plug. Charnwood DS10/20 Specification Maximum Width (1 Pass) 255mm (10″) Maximum Width (2 Passes) 505mm (20″) Maximum Workpiece Thickness 75mm (3″) Minimum Workpiece Thickness 5mm (1/5″) Minimum Length 65mm (2.6″) Maximum Removal 0.8mm (1/32″) Drum Motor (Induction) 1100w (1.5hp), 240v, 50hz Drum Speed 1440rpm Drum Size (Diameter / Length) 132mm / 260mm Conveyor Motor (DC) 50w (1/15hp) Conveyor Speed (Variable) 0-3 m/min Dust Port Diameter 100mm Wrap Width 82mm wrap Length 1550mm Dust Collection Minimum Requirement 1000m3/hour (50 Litres per second) Assembled Dimensions (WxDxH) 900 x 590 x 1140mm Shipping Dimensions (WxDxH) 800 x 640 x 640mm Weight (Net/Gross) 72kg / 80kg Several belts included in various Grits.