Sun + Rain Blocker 2.8 x 2 m - Front wall for awni

FREE DELIVERY 5-8 WORKING DAYS Available to purchase on our website https://www.mcafeesshop.com/product-page/sun-rain-blocker-2-8-x-2-m-front-wall-for-awning 🛒 Shop securely with a VAT registered Irish trader The front wall is suitable for all common awnings on motorhomes, campers or caravans. The awning wall has 3 sewn-on piping with diameters of 7.0 mm, 6.2 mm and 4.3 mm. The installation is carried out by pulling the piping into the front panel of the awning, on which there is usually a mounted piping strip with a corresponding diameter. After the wall has been pulled in, the 4 robust guying straps with tent pegs have to be anchored in the ground. The assembly is therefore quick and easy in a few minutes and can be done on any awning, regardless of the height at which it was mounted on the vehicle. This model offers the Sun + Rain Blocker in 6 sizes, each of which differs in the width of the protective wall. The available widths are 240 cm, 280 cm, 330 cm, 370 cm, 430 cm and 480 cm. The height of 200 cm is the same for all Sun + Rain Blocker models. This means that we offer the right front wall for almost all awning widths. If the width of your awning is between our offered dimensions, we recommend choosing the next smallest size. As mentioned, the assembly is child's play and can be done within a few minutes, so that the front wall is also ideal for stays with only a short standing time. The permanently attached mesh fabric serves to provide shade and at the same time offers a certain amount of wind protection. The fabric causes around 60 percent shading. This material is completely air-permeable and transparent. So you can see through and see what's happening around you. In addition, there is a waterproof and opaque cover that is rolled up downwards and fastened. The rain cover is closed with the help of zippers and covers the entire front wall surface. This cover is made of a polyester with 3000 mm water column and a UV 50+ sun protection coatin