Bending maschine ZRD 2150/1,0 mm DACHDECKER

The manual bending machine is intended for manual cutting and bending of sheet metal while keeping the parameters stated by the manufacturer. It is made of the high quality steel and coated with powder paint. All accessories and smaller parts of the device are protected against corrosion by zinc coating. The bending machine has been constructed in a way enabling adjustment of individual parts. Such structure allowed us to obtain high rigidity of the bending machine. The bending machine is also equipped with several mechanical adjustment elements, such as: pressing beam incline angle, pressing beam pressure and symmetry set-up against the lower beam. During cutting a sheet metal, the disc cutter can be left inside the guides at the edge of the machine without a necessity to put it away. Al structural elements of the bending machine are adjusted and it is not necessary to adjust anything. EQUIPMENT: 1. DISC CUTTER – blades (discs) are made of high-alloy steel (max. thickness of zinc-plated sheet steel is 0.80 mm). The wear life of the cutters corresponds to approx. 25 km of 0.5 mm thick sheet steel cut. It is possible to sharpen the discs several times. The cutting discs are very rigid, made of powder painted steel. Weight: 5 kg. You can also purchase new discs separately in case the old ones are worn. 2. LOWER TABLE EQUIPPED WITH LIMITERS (1000 mm) – enables placing the sheet metal and its free movements. This table can be used as a storage tray for sheet metal. It is equipped with a scale enabling precise arrangement of sheet metal being bent and cut. 3. ANGLE SETTING DISC 4. SINGLE POSITION BENDING PLATE ANGLE LIMITER 5. FRONT LIMITERS 6. BENDING MACHINE WHEELS AND STEERING SYSTEM 7. FOOT OPENING